ZEN is compatible with most thermostats
Which part of the world do you live in?
Which part of the world do you live in?
Zen replaces any wall-mounted 24V thermostat
- White Rodgers
- Brivis (except Brivis Networker)
- Honeywell
- Indiglo
- Hunter
- Lennox
- SmartTemp
ZEN is not a suitable replacement for
- Daikin
- Brivis (Networker)
- Braemar
- Mitsubishi
- LG
- Fujitsu
- Toshiba
- Hitachi
- Panasonic
- Siemens
- Split system airconditioners
ZEN is not compatible with
If your system is labeled 120V-240V or you have thick wiring with wire nuts as shown, your system is mains powered. ZEN can only be used with low voltage systems. If you’re unsure, please contact your home automation provider or HVAC installer.
Mains Powered Systems
If you are able to set different set point temperatures for different areas of your home, you have a multi-zone system. ZEN allows you to specify one set point only.
Multi-Zone Systems
If you have electric heaters running along the baseboard (skirting board) of your rooms, your system is not compatible with ZEN.
Baseboard Systems
Check the boxes below that correspond with the labels on the wire terminals of your old thermostat. You can disregard any links. Do not identify your wires based on color.
TIP: Take a photo of your existing wiring in case you need additional HVAC support.
Select your existing wires
Watch demo
Need Further Information
WE REQUIRE MORE INFORMATION TO CONFIRM THAT ZEN THERMOSTAT SUPPORTS THE WIRING COMBINATION YOU HAVE SELECTED.
1.
Ensure your system is safe by turning off the main breaker switch
2.
Take a picture of your wires
3.
Email to support@zenthermostat.com
4.
Check your email for more information and next steps
Not Compatible
Unfortunately, your system is not compatible.
We’re sorry to say Zen won’t work in your home at this time. However, we’re constantly adding new features, so please come back and check again later.
